timing belt movement - Z31 Performance

xanmanz31

Senior Member

Posts: 218
#1

timing belt movement

10-24-2013, 02:52 AM

just finished timing belt and NA2T noticed my timing belt has moved back almost against the rear timing cover. cams and crank are tight tensioner isnt too tight. i also flipped it around so the arrows pointed out .

any ideas?
G-E

Junior Member

Posts: 6320
#2

10-28-2013, 07:29 PM

Do you have those tapered washers on both sides of the crank sprocket?
Augustus Maximus

Senior Member

Posts: 1739
#3

10-30-2013, 01:48 PM

Reading and attenion to detail will always be your friend. Get a manual and read it. Timing belt is rudimentary.

Cha iro

enjoy building it yourself.
if it fails, fuck it.
at least you gave it a whirl.
xanmanz31

Senior Member

Posts: 218
#4

11-18-2013, 02:50 AM

G-E;n762065 wrote: Do you have those tapered washers on both sides of the crank sprocket?

just washers on outside sprocket straight to cam

i think it ended up being loose sprocket bolt as retarded as i look ill admit it. i was just getting in a hurry i wanna drive it so bad.

after i tightened it i was able to start it fairly easily and then the dreaded oil seepage from exhaust manifold. im doing intake valve seals now.