Z31 fan shroud - Z31 Performance

Sailingary77

Junior Member

Posts: 4
#1

Z31 fan shroud

07-04-2015, 01:52 PM

I've got an 85 non turbo and having trouble with the fan shroud , I had my Rad serviced and just can't get the dam shroud back in properly , seems that it needs some fasteners on the sides ?? Any advice ? Thanks and happy 4th to all
1artworkz

Senior Member

Posts: 1143
#2

07-04-2015, 02:51 PM

Maybe Metric Speed Clips?

https://www.belmetric.com/metric-scr…-c-10_126.html
boosted300

Senior Member

Posts: 195
#3

07-04-2015, 06:45 PM

Oh that site is GOLD!
Sailingary77

Junior Member

Posts: 4
#4

07-05-2015, 01:16 AM

Thanks I'll give them a try , look perfect . I had my fan eating away at the shroud which ended up in a bent water pump shaft , replaced everything including the timing belt and ended up with the big washer that goes on the crank shaft to hold the belt in place , left off .. 😕 it's been running fine for a few months without that washer , should I need to worry about that , it's a total pain in the ass to take everything apart again but if it's gonna cause me more problems down the road ? Please advise thanks much
1artworkz

Senior Member

Posts: 1143
#5

07-05-2015, 09:27 AM

I got most of my black split loom from them. The did not have 7/8" … had to get it on Amazon.
Sailingary77

Junior Member

Posts: 4
#6

07-05-2015, 11:28 AM

So is it a big problem not to run with the timing belt retainer washer that goes on the crank shaft ?
Sailingary77

Junior Member

Posts: 4
#7

07-23-2015, 08:44 AM

Any help
amreboot

Banned

Posts: 9875
#8

07-23-2015, 10:08 AM

Its there for a reason.