pathy distributer

  • #1

    pathy distributer

    Why do you need to replace the z31 D for the pathy d while doing the intake plenum swap. I read the how-to but it never says why you have to and i dont see why the stock z31 D wouldnt work.
    Blitz BOV, Walbro 255, HX-35 (8psi), Tokcio blues and lowering springs.
  • #2
    z31 is too tall
    SS

    Support RRR Z Parts!!!!

  • #3
    to tall for what. Hitting the plenum or somthing?
    Blitz BOV, Walbro 255, HX-35 (8psi), Tokcio blues and lowering springs.
  • #4
    on z31 the plug wires come off the sides.

    on pathy they come off the top.

    i think.
  • #5
    If you really have to use the Z31 dizzy, you can trim the plug connection down to clear the manifold.(not reccomennded.) IIRC you can use a maxima cap or something that will work with the Z31 dizzy and the pathfinder manifold. someone chip in if Im wrong.
  • #6
    OrionMCP wrote: If you really have to use the Z31 dizzy, you can trim the plug connection down to clear the manifold.(not reccomennded.) IIRC you can use a maxima cap or something that will work with the Z31 dizzy and the pathfinder manifold. someone chip in if Im wrong.
    88 maxima cap on a z31 dizzy will clear the pathy plenum........
    Denis Gagné
    aka VGwagon
    GM specialized licensed technician

    69 510 VG30 powered wagon
    73 240z shell VG30et in progress
    86 300zx NA2T