Cx racing intercooler and radiator kit


  • Cx racing intercooler and radiator kit

    I'm currently installing the radiator and I can't figure out how to mount it. If anyone has any experience with the cx racing kit it would help a bunch

  • #2
    Best of luck. They do not offer instructions on how do it nor are they willing to help you out if you try to contact them.

    1986 300ZX Turbo…sold
    1990 Skyline GT-R…new money pit
    2014 Juke Nismo RS 6-speed…daily

  • #3
    Any updates on how this worked out

  • #4
    The CX Racing kit looks like a garbage design, the IC is basically in the worst place possible. You just gotta accept that your intercooler install will be custom. Go front-mount and don't overthink the pipe sizes because unless you're going huge, in which case you shouldn't need this advice, you are going from a 2" turbo outlet to a 54 or maybe 60mm throttle body so there's no point trying to ram 3" IC piping in there. You can either holesaw through the wheel well which makes it a no-brainer, or go over the top of the rad if you have gone with an efan (Even with a big 3-row rad you just have to clip a little bit from the center nose bracket thing to make room for 2" pipe over the rad, and people with smaller rads can get 2.5" over there.)