300ZR headlight lenses

Curious if there's a DOT sticker on there anywhere?

I would guess that the lens fluting would be different on account of the opposing traffic and how the beams are supposed to direct the light.....

I would also guess that there would be no DOT label anywhere on the lens.
Being for Japanese market only they would supposedly never make it here to North America.
They would probably be 'approved' by whatever Japanese Government Agency approves stuff over there though......

Cool find.

The real question is, does he have any JDM 84-86 headlight assemblies? Cool find.

There are two headlight "standards" if I recall correctly, ECE and DOT. The noticeable difference is that ECE headlights have a reversed step in the beam. In the USA, DOT (LHD) headlamps have a step that goes from the left and up to right. This lowers the beam on the side of oncoming traffic. ECE (RHD) headlamps the step goes from the right up to left since they drive on the opposite side of the road.

Not sure about inspection standards, but you might fail since they test the headlights.

One would think you could switch and flip sides possibly. Basically l to r ,then flip 180.

He has both complete assemblies

how much for a set of 84-86 lights?

pm if possible thanks!

He only has this one set left over from a 87 300ZR front clip he has shipped from Japan several years ago.

ahh too bads! thanks anyways red!

have 84-86, but reflectors are gone.

how much?

I want some 84-86 one piece headlights… SOOOO BAD>

I'll upload pictures first, then you decide. OK?
try to do this today (catch a cold, not sure if be able to get garage).
actually, JDM lenses are same to UK lenses (and AUS).
but, if you want to swap.... ehmmm, buckets are also different.

I know at least one of US z31p members who got em not so long ago (EU spec, LHD)