Isis 240SX Clutch Line

  • #1

    Isis 240SX Clutch Line

    Hey guys, I was on enjukuracing and I noticed they have a clutch line for 240's
    http://www.enjukuracing.com/products/%2 … 52d98.html

    Wondering if it would possibly replace the whole hardline and stuff for our cars?
    If not, going to find a 280z front driver side brake line.
  • #2
    It works fine as do ones for z32's. you can also use the 240sx short line for ones that had manual trans OE. Some z32 ones as well, really id be willing to bet any clutch line for any manual nissan would work given proper length, Probably alot of other Japan made cars as well as it is a standard fitting.
    http://www.ebay.com/itm/CIRCUIT-SPORTS- … 16&vxp=mtr
    Hmmm, Whats next?
    Full Size Bronco, smashing shit.

    84ZXT
  • #3
    shromy wrote: It works fine as do ones for z32's. you can also use the 240sx short line for ones that had manual trans OE. Some z32 ones as well, really id be willing to bet any clutch line for any manual nissan would work given proper length, Probably alot of other Japan made cars as well as it is a standard fitting.
    http://www.ebay.com/itm/CIRCUIT-SPORTS- … 16&vxp=mtr
    Sweet..
    I'm going to use my friends S13 as a measurement. Thanks for the tips!
  • #4
    I sold one from an s13 o Nissanegg, I believe he is using it but not sure.
    Hmmm, Whats next?
    Full Size Bronco, smashing shit.

    84ZXT
  • #5
    shromy wrote: I sold one from an s13 o Nissanegg, I believe he is using it but not sure.
    Yep. Using it and it's great.

    1986 300ZX Turbo…sold
    1990 Skyline GT-R…new money pit
    2014 Juke Nismo RS 6-speed…daily
  • #6
    If you have the stock hard line you can use this http://www.summitracing.com/parts/EAR-63080913ERL/, haven't ordered one yet but the part number has come up before.
  • #7
    I'ma try the ISIS one and hopefully have luck with it
  • #8
    I just noticed it said that the clutch line is 52" long.
    I am pretty darn positive that'll be lengthy enough.
    I sha'll be receiving the rest of the parts in the upcoming week.
    Till then, anything that'll make my life easier, let me know.
  • #9
    I replaced my slave, and didnt want to have to deal with the bleeder on the stock hardline, so I got a that clutch line, and it works perfect
    1987 NA 300zx
  • #10
    mikeybee95 wrote: I replaced my slave, and didnt want to have to deal with the bleeder on the stock hardline, so I got a that clutch line, and it works perfect
    Sweet.
    It looks like to be of perfect length
    Quality is pretty nice.

    Whenever I get my flywheel resurfaced and the DXD clutch in, car is going into the shop