what size clutch do i need - Z31 Performance

stevey

Junior Member

Posts: 13
#1

what size clutch do i need

10-21-2013, 04:37 AM

I've killed the standard clutch while drifting last week , now the problem i have is the car is a mix of parts so i don't know which clutch i have without removing the gearbox. Is there anyway of telling without having to strip it all down ? the engine came from a 88 turbo but has a t3 fitted when I stripped it out and has the 30a gearbox in it , is there any engine number etc ? sorry if this has been asked before but I can't seem to find anything that might help . cheers
jaqattack02

Senior Member

Posts: 1185
#2

10-21-2013, 09:31 AM

The clutch you need is based on the transmission you have. If you have a 30A you need a clutch for an 88-89 turbo.

Prius… because Pretentious wouldn't fit across the back of the car…

Cheap, Fast, Reliable - pick any two

My 1986 Turbo Build
stevey

Junior Member

Posts: 13
#3

10-21-2013, 06:11 PM

Well i just checked the gearbox again and its a 30A gearbox , which is a problem … I live in the UK so parts arent easy to get hold off, Only clutch i had found to buy (atermarket) is the 240mm one , Now looks like i need a 250mm one ...... Doh
G-E

Junior Member

Posts: 6320
#4

10-21-2013, 08:16 PM

You can use the 240mm clutch if you get the matching flywheel… maybe you can find one of those too aftermarket
300zxturboftw

Senior Member

Posts: 3709
#5

10-22-2013, 12:52 AM

I think im using a 240 with the chromoly aftermarket flywheel.

Usual Z31 suspect: Garage Queen (aka broken)