cam grind suggestions

  • #1

    cam grind suggestions

    hey im sending out my stock vg30e cams to schnider racing soon and i was just looking for some sugestions on what grind to get to have good mid range and idle i emailed them and they said a .280 would have a rough idle.
    The days of NA


    http://www.cardomain.com/ride/2653941
  • #2
    http://z31.com/forum/viewtopic.php?t=870
    85 Z31 6.0 LSX turbo 766whp/792wtq
    04 GTO, LS6, big cam, porting, N20… underway for summertime daily driver.
  • #3
    ok so im going with a .473 lift and a 266 degree cam grind by schnider racing, ill keep you updated when i i get them back.
    The days of NA


    http://www.cardomain.com/ride/2653941
  • #4
    i read every thing on the cam degreeing SATAN. but now, what cams would be better than the schindler cams? since i was planning to buy these cams down the road. what other company would you suggest?
  • #5
    TurboZkid wrote: i read every thing on the cam degreeing SATAN. but now, what cams would be better than the schindler cams? since i was planning to buy these cams down the road. what other company would you suggest?
    Well, the problem is the same as with everything else. You get what you pay for. The Schneider cams will run your car and unless you have a good set of cams with the same grind to compare to the Schneider shit cams, you may not even know that you just bought crap for cams.

    The only suggestion I have is either the ass rape JWT cams, or to go to a company like ISKY or someone like that, and have a custom set of cams made.

    However, to be honest, I haven't come across a set of JWT cams to degree them to see how they stack up either. They could be just as bad, who knows.
    85 Z31 6.0 LSX turbo 766whp/792wtq
    04 GTO, LS6, big cam, porting, N20… underway for summertime daily driver.
  • #6
    Elgin cams in the bay area said they'd regrind me a set for around $350. whatever specs (within physical limits) you want. I'd trust them over Schneider these days.