Rear subframe

  • #1

    Rear subframe

    I'm in the process of replacing all the old rubber in the rear with poly do I need new collars for the rear subframe bushings?
    Attached Files
    • 2014-04-12_11-37-39_867.jpg (98.3 KB)
  • #2
    What do your eyes tell you…are they in bad shape?
    Cha iro

    enjoy building it yourself.
    if it fails, fuck it.
    at least you gave it a whirl.
  • #3
    they are bad, was hopeing that i wouldnt need them with the poly bushing but looks like i need to buy oem bushing and get the metal off the rubber.
  • #4
    I think the new sub-frame bushing come with a collar



    1988 300ZX Turbo, Shiro Special #760
    1988 300ZX Turbo Automatic (wife's car)
    1991 Hard-body 2WD

    http://zccw.org/zccw/?page_id=1215
  • #5
    They should come with the inner sleeve.
    5.3 LSx Z31
  • #6
    my prothane lower control arms came with a sleeve for the outer bushings, not the serrated edged ones for the inner bushings. those need to be saved or pillaged.
  • #7
    The prothane trailing arm bushings don't come with sleeves, the subframe bushings do
  • #8
    ok i order the subframe bushing the other day i should be good then, hopefully get it all back together this week after i sand blast and paint the subframe. Thanks for the info.