MR2 rear AGX inserts in 87-89 NA tubes for coilover sleeves?

  • #1

    MR2 rear AGX inserts in 87-89 NA tubes for coilover sleeves?

    ?Does anyone have any info??
    -89 300zx - recent- 88 turbo motor HX35w ported custom internal wastegate build with roastin300 custom adaptor flange+feed line , FMIC 2.5" piping TINY INTERCOOLER RESTRICTIVE PIPING, 480cc injectors, Custom Maxima plenum, rommulator moderate tune, Z32 maf upgrade, J30 vlsd swap (shimmed), Eibach progressive rate springs, Tokico illuminas (rear), tokico blue (front), poly bushings, short shifter mod. @18psi 323 whp 387 ftlbs.
    -Previous- NA2T on 12-13 lbs 243 hp 255tq (exhaust leak)
  • #2
    Where's the rest of the question?
  • #3
    Need more info. What year MR2? 85-89 mk1 or 90-96 mk2.
    1986 300ZX factory Turbo 2+2 5 speed swap. 1985 Toyota MR2. Floor boards gone. Good fabrication practice.
  • #4
    Im not sure the year, ive done some reading and it was never clear. The question was in the title G-E. But what year mr2 rear struts would work. And will NA tubes work? But dont worry, the Z has died on me for good this time, because i refuse to go back in that engine bay LOL
    -89 300zx - recent- 88 turbo motor HX35w ported custom internal wastegate build with roastin300 custom adaptor flange+feed line , FMIC 2.5" piping TINY INTERCOOLER RESTRICTIVE PIPING, 480cc injectors, Custom Maxima plenum, rommulator moderate tune, Z32 maf upgrade, J30 vlsd swap (shimmed), Eibach progressive rate springs, Tokico illuminas (rear), tokico blue (front), poly bushings, short shifter mod. @18psi 323 whp 387 ftlbs.
    -Previous- NA2T on 12-13 lbs 243 hp 255tq (exhaust leak)
  • #5
    I believe its the sw20 mr2 inserts. Check the datsun forums. I went with mk1 scirocco inserts because the sw20 inserts weren't short enough for my setup.
    http://z31performance.com/showthread…board-Zed-Pics
  • #6
    Did you have the turbo tubes or n/a?
    -89 300zx - recent- 88 turbo motor HX35w ported custom internal wastegate build with roastin300 custom adaptor flange+feed line , FMIC 2.5" piping TINY INTERCOOLER RESTRICTIVE PIPING, 480cc injectors, Custom Maxima plenum, rommulator moderate tune, Z32 maf upgrade, J30 vlsd swap (shimmed), Eibach progressive rate springs, Tokico illuminas (rear), tokico blue (front), poly bushings, short shifter mod. @18psi 323 whp 387 ftlbs.
    -Previous- NA2T on 12-13 lbs 243 hp 255tq (exhaust leak)