CV shafts..NAPA remfd?

  • #1

    CV shafts..NAPA remfd?

    Anybody have experience with using re manufactured CV shafts? I am looking at these from NAPA. They list 2 different part numbers and prices for each side, all remfd. Not sure what the difference is, maybe turbo/non-turbo?

    http://www.napaonline.com/Catalog/Re…28529/Ne-25000
  • #2
    The difference between na and turbo is number of bolts. Also the right and left side are different lengths.
  • #3
    Differences:
    1. Turbo
    2. NA
    3. Shiro

    A. Left
    B. Right
    86na - BlueZ
    Shiro #366 - Kouki Monster
    85t - Mr Tickles
  • #4
    Thanks guys. NAPA didn't specify. I figured there was a difference between N/A and Turbo.

    Anybody use the NAPA re manufactured ones?
  • #5
    Go to www.rockauto.com for best results



    1988 300ZX Turbo, Shiro Special #760
    1988 300ZX Turbo Automatic (wife's car)
    1991 Hard-body 2WD

    http://zccw.org/zccw/?page_id=1215
  • #6
    I replaced my cv shafts about 3 weeks ago and found Rockauto to be more expensive than O'Reilly's. I usually use RockAuto for everything. Autozone can't even get them anymore. O'Reillys was 160 with a core charge of $80. So it looks to be about the same prices as NAPA.
    Some people never go crazy. What truly horrible lives they must lead.
  • #7
    Ok, thanks. Looks like I will be ordering from NAPA.
  • #8
    NAPA offers and specifies both left and right for Turbo and NA.
  • #9
    Just ordered a passenger one for my NA from Autozone, $75 + $5 core. Ordered them before and have never had an issue with them
    Bah-chicka-wow-wow