Subframe Bushing Dimensions

  • #1

    Subframe Bushing Dimensions

    Would anyone be so kind to either list the dimensions of aluminum subframe bushings, or have a solidworks file/drawing? I'm planning on making a set when I have access to a lathe again.

    Thank you.
  • #2
    The total height can be anywhere from 68-71mm, the inner diameter is 21mm, the upper end is chamfered, and the body of the bushing will have to be 75.2mm…

    You figure out the rest
  • #3
    If anyone is interested in this as well, Gary had a drawing hosted of a spec'd poly bushing.

  • #4
    ^Good man. Way to share the knowledge.
  • #5
    Except it's not entirely accurate
  • #6
    Neither were you.
  • #7
    If you're trying to make SOLID subframe bushings, measuring something squishy won't help will it?
  • #8
    I never said it was.
  • #9
    I don't understand, I gave you actual dimensions that fit, how was I wrong?
  • #10
    You couldn't describe it in a better way? Or list all the dimensions (larger outer diameter of the annulus, length of the extruded larger OD, ect.) instead of saying "figure out the rest". There are only 5 dimensions.
  • #11
    No fighting or I'll come over and start bitch slapping
    Cha iro

    enjoy building it yourself.
    if it fails, fuck it.
    at least you gave it a whirl.
  • #12
    Originally posted by NissanXRMA View Post
    … instead of saying "figure out the rest". There are only 5 dimensions.
    I'm sorry I didn't give you irrelevant information, I'll try harder next time

    Bunnies!