vogtland springs…anybody use these or anyone have any info


  • vogtland springs…anybody use these or anyone have any info

    Has anyone used these or have any other info as far as spring rate on these? Searched there site, couldn't find anything and I cant understand german.

    http://www.ebay.com/itm/VOGTLAND-GER…7de4fe&vxp=mtr
    We choose to do things not because they are easy but because they are hard.

  • #2
    How bad can it be. Give it a shot and post pics when you get them on.
    Cha iro

    enjoy building it yourself.
    if it fails, fuck it.
    at least you gave it a whirl.

  • #3
    Google will take you to a few car forum where they get positive reviews.



    1988 300ZX Turbo, Shiro Special #760
    1988 300ZX Turbo Automatic (wife's car)
    1991 Hard-body 2WD

    http://zccw.org/zccw/?page_id=1215

  • #4
    Contact them and get the specifics on the spring rate…
    Feedback- viewtopic.php?f=18&t=19840

  • #5
    Don't know much about them in Z31 land—but with the BMW E34 crowd they are very popular. Progressive spring rate with the most drop for that chassis. Def a reputable company.
    1987 GL Slicktop | SS 729 Under Renovation

  • #6
    does someone have pictures of a z31 with vogtland springs ?
    would be intressted how low the car comes with those springs =)
    my sunset Z youtu.be/HVp6CFcrx2U
    making of video youtu.be/9BN8p-DuVuo

  • #7
    Who cares on how much they lower. Care about what their spring rates are.
    86na - BlueZ
    Shiro #366 - Kouki Monster
    85t - Mr Tickles

  • #8
    i hope there are not so much lowering the car ! spring rate should be OK
    vogtland says lowering the car around f/r 25mm(1inch) and rate is 200/220 lb/in

    but i like to see how much the lowering effekt is in real.
    my sunset Z youtu.be/HVp6CFcrx2U
    making of video youtu.be/9BN8p-DuVuo

  • #9
    Why don't you just by Eibachs? A lot of people have them, they essentially do not lower the car since you are replacing saggy OEM springs with new springs.

    Just ensure you are replacing the spring seats, especially in the rear. Old torn or missing springs seats typically account for 1/2 rear sag.
    86na - BlueZ
    Shiro #366 - Kouki Monster
    85t - Mr Tickles

  • #10
    you mean 1/2 inch ? i got more than 1,5inch rar sag,
    i will see the spring seats if they are good or not and ofcourse will replace them =)
    eibachs are hard to get in europe, i order now a set vogtland springs, will see how good they will be.
    my sunset Z youtu.be/HVp6CFcrx2U
    making of video youtu.be/9BN8p-DuVuo

  • #11
    now i get them, i was only ordering rear springs because of rear sag
    looks good, approx. free length 330mm and wire diamter 13,5mm and coil diameter 120mm
    z31 federn (1).jpg
    z31 federn (2).jpg
    my sunset Z youtu.be/HVp6CFcrx2U
    making of video youtu.be/9BN8p-DuVuo

  • #12
    Stand them up side by side with the stock one's and take a picture.



    1988 300ZX Turbo, Shiro Special #760
    1988 300ZX Turbo Automatic (wife's car)
    1991 Hard-body 2WD

    http://zccw.org/zccw/?page_id=1215

  • #13
    today
    i was going to swap the springs
    but now i know why i have rear sag

    1) the lower spring seats are missing
    2) the bottom of the coil is broken, i never see it before

    so i have to buy first the rear spring seats to conteniued
    55038-01P00 & 55034-01P20
    i did not find them at rockauto.com :/
    and the nissan dealer´s in germany can´t order them x)
    my sunset Z youtu.be/HVp6CFcrx2U
    making of video youtu.be/9BN8p-DuVuo

  • #14
    The rear spring seats are NLA. There may be another run of poly seats by Gary Molitor sometime this year.



    1988 300ZX Turbo, Shiro Special #760
    1988 300ZX Turbo Automatic (wife's car)
    1991 Hard-body 2WD

    http://zccw.org/zccw/?page_id=1215

  • #15
    I can get you the rear spring seats. Do you need me to ship to Germany? PM me, and I'll try to get you squared away.