Anyone worked with CCW ordering wheels?

JAMESZ

Member

Posts: 56
#1

Anyone worked with CCW ordering wheels?

10-10-2016, 04:15 PM

My Z is finally nearly done and one of the last things to do is get new wheels. I'm in the process of ordering CCW Twisted Classics for the car, but I've been out of the car game for awhile now and was wondering if someone has worked with them or anyone else getting custom wheels made. My 86 Turbo has stock hubs with Bilstein struts/shocks and ST springs. I'm looking at something around an 18x8.5 et20 front with 245/35/18s and 18x9.5 et32 rears with 275/35/18s. I probably need more of a sanity check at this point to make sure I'm not ordering a wheel with bad offsets, and that I got the measurements somewhat right since AZ-ZBUMs site is off-line these days.

Thanks.

2006 TR/R GTO M6 18s Stock

1986 MB & S/B Z31 300ZX Turbo 5spd Not Stock
88sinZ

Senior Member

Posts: 2019
#2

10-10-2016, 05:46 PM

18x8.5 ET+5 you'll want the 225/40 maybe a 235 to keep F&R diameter close

18x9.5 ET+0 same tire specs

I'm running this exact set up.

The rear fenders required a light roll and they fit great, I would have liked maybe a ET0 or -5 up front but the spacer set I ordered were 2x20 2x25mm.

https://z31performance.com/forum/z31…1185-reference

Last edited by 88sinZ; 10-10-2016, 06:10 PM.