How would these wheels look on an SS?

Previous 1 2
  • #16
    adamvann3 wrote: Reminds me of work meisters. There is a pic of a black zenki with gold meisters on them floating around somewhere. Go for it, they should look awesome. I am also looking for some gold with a polished lip for the SS.
    This one?












    I want my SS to look like the white Z. I'm still debating whether I paint the trim black or charcoal along with the door handle.
    The OZ wheels are also more affordable than the Work Meister wheels but look similar.

    Check out these wheel sites:
    http://www.rbwheels.com/index.php?main_ … h=17_21_23

    http://www.memoryfab.com/wheels/used/17/
    Shiro #443

  • #17
    Rick88ss wrote: I'm sure I'll put some spacers in the back. What's a good place to get some? Do I also need longer wheel studs?
    Your going to want 15 to 20mm spacers all around (roll fenders, lower car more). They are nice looking wheels, and OZ is a quality brand.

    Since its a popular style, why not look for something with:

    ºStaggered Fit (After fitting 9.5's, I have realized 10" is min-spec)
    ºMore lip (A flat face wheel requires lots of lip to look good)
    ºLower Offset
    ºMoar lip
    "produce first.talk second."
  • #18
    [quote]Mike_GruiZinga wrote:
    Originally posted by Rick88ss
    I'm sure I'll put some spacers in the back. What's a good place to get some? Do I also need longer wheel studs?
    Your going to want 15 to 20mm spacers all around (roll fenders, lower car more). They are nice looking wheels, and OZ is a quality brand.

    Since its a popular style, why not look for something with:

    ºStaggered Fit (After fitting 9.5's, I have realized 10" is min-spec)
    ºMore lip (A flat face wheel requires lots of lip to look good)
    ºLower Offset
    ºMoar lip
    Staggered fit = more $$
    more lip = more $$
    Lower offset= spacer
    Shiro #443

  • #19
    Rick88ss wrote: Lower offset= spacer
    Lower offset = fender rolling.
  • #20
    [quote]vagabond wrote:
    Originally posted by Rick88ss
    Lower offset= spacer
    Lower offset = fender rolling.
    Only if you run less than +10 on a 9" wide wheel with low. A -1.4 offset on a 9" wheel with no drop does not need a roll. (Of course this is on a kuoki.) Enjoyrth runs 18x9 et -1.4 on his SS.
    Shiro Special # 981 Being assembled in my spare time Chromoly acquired!
    Originally posted by BoostedMamma
    Heads up makes teh panties drop. BUT I don't have a penis OR a fast car, so I guess my opinion doesn't count.
  • #21
    great wheel for the price, regardless of the spacers required (if that's what you're getting them for). both in looks and quality.

    much like the mustang-bound wheels I'll be getting sometime this winter, and having them powdered gold in the center as well.

Previous 1 2