Inner CV seal Kit Boot
-
1artworkzSenior Member
- 1143
Inner CV seal Kit Boot
After several years recuperating from my health problems, I'm back and trying to put my car back together.
What are people doing to replace the inner CV boot? Part # 39241-03P25 for an 84 turbo.
I searched this site and found references to EMP but they don't offer retainers and also Beck/arnley but they don't have turbo inners.
So, if EMP is the only option what is used for retainer, hose clamp? Can the old ones be reused? -
shromySenior Member
- 2189
DORMAN 614002 can be had at rockauto and others. the bands could be sourced from your local driveshaft shop as well usually. anyone who rebuilds cv axles.Hmmm, Whats next?
Full Size Bronco, smashing shit.
84ZXT -
88sinZSenior Member
- 2019
CTA Tools 4240 CV Joint Boot Clamp Set (clamps)
and
OTC 4623 CV Joint Banding Tool And Cutter (tool)
I've purchased both these items through www.amazon.com
Glad to still see you around old man!Last edited by 88sinZ; 06-06-2016, 09:42 PM. -
1artworkzSenior Member
- 1143
-
1artworkzSenior Member
- 1143
-
mtherkampSenior Member
- 243
Keep us posted on the progress! Great to have you back!Butter (credit where credit is due): "You have this "gift" where you can make cooking a Hot Pocket seem like you need a certain wavelength microwave and involve brown mustard." -
1artworkzSenior Member
- 1143
Looking at the photo, it looks like it is only one boot. Is it only one boot kit? I need two. Also, my Message Center In Box does not show any new massages since 2015. For future massages please use [email protected] -
aZinMASenior Member
- 146
Correct, it is only one boot kit for one side. 39241-03P25 is the inner and there is also 39741-03P25 which is the outer boot kit. I do have both so if you need the outer one let me know. Same price for either side.
eMail sent.Last edited by aZinMA; 06-08-2016, 01:22 PM.