Z31 cranking but not starting


  • Z31 cranking but not starting

    Rundown
    getting spark
    Getting fuel (to fuel rail atleast)
    Starts to get close to running when we spray starting fluid in, after we stop it does after a second
    put nodes upto the injectors and they light up

    So basically the turbo motor was blown when I bought it. I then bought a na motor and swapped it in with the turbo parts on it.
    I do have a code 13 for the collant temperature sensor.

    Any help is appreciated

  • #2
    Ok so I messed with the timing a little it starts up and goes to 1k for 2 seconds but then shits off. Another thing I noticed was that when I gave it gas when it starts it chokes it out and shuts it off kind of.