Z32 TT tranny Swap..

Not going to fit…period. And a Maxima stater bolts up perfectly. But I'm working with a Z32na tranny.

Thanks for the info Augustus I will also be purchasing a NA tranny as well. I just want to get the correct info out there because it cost me an extra 400 dollars to get everything to work. I could have of bought my tranny, starter, and brackets with that money but I will be more cautious from now on and do my best to spend every dollar of my build on the correct parts.

Hey guys, my things have arrived from DXD but they sent me the 350z HD pressure plate instead of the SSBbut dave will already took care of that for me A+ customer service. Upon inspection of my new clutch disk though I noticed a very small crack on the organic material at the end of the disk. It has a little organic material missing again the section is 1mmx3mm but since it is at the end a little of the metal content is sticking out maybe I am to picky but wanted to know if any of you have experienced this before.

Yeah.. whats the going rate for a bell ??

350.00 and you dont have to worry about flywheel, clutch, starter, and brackets. If I wouldve known that the wrong info was posted I would have just done that.

350.. hell , it would be a ton cheaper to just get a bell from a Pathy 30a from a Pick & pull..

Yes it would if you have that option.

Hmmm, gives me an idea to go JY hoping for those of you wanting to do this. I could get a few in one day easily.

Money in hand.

Only thing is i would hate shipping them lol. But I may look into this since the JY I use is close and has a great price on them. I would probably just get the entire transmission. I am thinking around 150+ ship give or take, maybe even 150 shipped for just the bell.

Looked into it a bit.
86-95 d21
01-04 pathy
99-04 frontier
86-95 pathy
and some more. Anyone have any clue if the 3.5l shares the vg bolt pattern? I am thinking no.




Possibility of a few sitting around.

97 pathy will work too

I don't think 3.5 shares VG bolt pattern. in order to make use of a 3.5 Manual trans, you need to use a JWT adapter kit that makes use of the VG Auto bell-housing, modified to fit onto the 3.5 trans with an intermediate plate.

Yup, even if I get the bellhousing I still want to try the other way, since I have all the parts to do it with.

So if I get a bellhousing from a pathy 30a I can use z31 starter, flywheel and clutch on the z32 tranny correct?