transmission bushings

Sign me up buddy.

I'll take a set!

Jumpin in for a set to keep watch!

Those bushings and window triangles are a sure shot.

Can anyone measure the O.D. of the steel collar that the bolt runs through? If anyone has it laying around that would be great. Otherwise I'll get the car up on stand and pull the mount myself to measure. I received a quote today and I just need to double check this dimension before I put an order through. Thank you

16.3mm

It's not critical, there's plenty of bushing even if it was 3/4" tubing, as long as the ID is a fairly loose 10.5-11mm

Any new news harwood

I'm in for a set if they're still being produced.

The bolt location in the pictured bushings is wrong. I have a set in great condition if you need a reference.

Is this referring to my photo?

As for progress of the bushings… Winter has struck early and very hard here in Wisconsin and I simply ran out of time to remake a sample bushing so I could confirm the fitment in the garage. The drawing I had of the original bushings I made was thrown away as I didn't expect to make them every again. Really the only thing I need is to confirm, for myself, that the through hole is the right diameter before I put an order in. This is important so the original steel sleeve can be reused.

I have the molds and can make 4 sets at a time for anyone desiring a set of 4 bushings in the correct hardness, red. $40.00 delivered. Add $10 for Canadian shipping. Email me at [email protected]

This spring I will be doing a production run of front and rear spring poly plus steering rack bushings.

I'll take a set in red, PM me with payment details please

Gary to the rescue hehe

I will email too. So we get 4 of those trans bushings but it only requires 2, that's what he's saying?