transmission bushings

Not anymore

What about the aluminum x-member
or do I have to go oem

Yes, you can buy poly crossmember bushings. Gary Molitor used to make the trans bushings but stop a while back.

I think hardwood made some. Can maybe convince him to make a batch of bushings. I know there is interest.

I really should get on this now. haha I will try to get something going on monday. Material is what I need to look into. I've made them for my car and I can make them for you guys too.

This. Yes please. Let us know if you need a deposit or something to buy the material?

I will start a thread when I find the best way to make them. Keep your eyes peeled!

These are the dumbbell bushings correct?

Yes, reddzx, as seen here from harwood909's post.....

I used the early style tension rod bushings from the prothan kit, threw them on a lathe after freezing them overnight… drilling was the hard part

Harwood if you need anything to get this going please let me know
And thank you

Harwood any luck on figuring out thies bushings

Waiting for the quote from the salesmen at work, once I have that I can see if people are still interested. I chose to have them poured instead of machined so production will take a bit longer and price will be slightly higher than if I were to turn them on my own. The finished product will be much nicer and will have a similar appearance to pieces that come in Prothane kits.

I'm down for one maybe two sets depending on price