Anyone running 17x10 +20 square setup? or 17x10/18x10.5 stagger

that would work man!

just a quick measure from the back of the stock wheel to the first thing it would hit front/rear. if possible!

I would wager you can fit an 18x12 et18 or 19ish. In the rear to clear the trailing arm, and the inner fender wall depending on how low you go/how much camber you run. Not sure about the fronts

hhmmrrmmm interesting.


I dunno, Ive stumbled across some 17x8.5 +13/ 17x10 +20 Borbet Type A's. I would have to space a bit but I LOVE type A's with a passion.

now to decide to go gangsta, or classy haha

well its been decided, going to run a 17x10 square setup +15, 235/40r17 F and 255/40r17 R


with spacers (if I keep what I have now) the setup will be 17x10 -20 effective !

Front should be really easy even with -20. Rears are going to need fender work if you want to run anything decent for camber (@ -20). I would bolt them on at +15 and see where you are at prior to adding a spacer in the rear.

good advice. I may change up the spacers aswell to make everything fit nice!

I just want to avoid the hammer head look haha!

here are the wheels I have ordered! ive always loved meshies and picked these up NEW for WELL under MSRP/Market value!!

Did you get them local/canada? more deals to be had?

negative, last set blowout on ebay, they are listing the 17x9 +5 in graphite( which I also won yesterday for 450$ for the set but cancelled as I thought they were 10s)

link
http://www.ebay.com/itm/Axis-OG-San-…343c8c&vxp=mtr

darn, wanted another set for the mk2 lol

10s would be crazy haha, why not rock the 9's on the mk2?

was looking for 15/16 and 7/8or9 lol. I've already got 16x7.5 and 16x9 on it.