Alternative S/Z/Q subframe swap adapter kit

zdriver_kado

Member

Posts: 100
#46

03-30-2015, 05:13 PM

It's just preference at this point. I'll go with RT if I choose to not fab the rear for myself. Regardless I will want the front sleeves. G-E, if you have an extra sleeve set i'll take 1 or 2.
G-E

Junior Member

Posts: 6320
#47

04-02-2015, 05:38 AM

These are the templates to cut the front pieces, print them with no scaling, overlay onto some plate, and go nuts cutting
G-E

Junior Member

Posts: 6320
#48

04-13-2015, 03:40 PM

Yay 2 left… Save $30 over the other kit, and save some another $50+ because you only need half the bushings (ie. you can go splits with someone else)
G-E

Junior Member

Posts: 6320
#49

04-19-2015, 01:37 PM

These would go great with an R32/S14/S15 subframe: http://zilvia.net/f/showthread.php?t=600545 (GTR diff and axles, good price)

You'll want this kit If you want to install any of the other subframes outside of the S13 or S14, there's no width or pin placement restrictions