Upgrade to PRW-2 Ign. Control Module (Power Transistor Unit)

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

That's what mine came off of.

As an indication of how well my car runs.

I was getting spark cut-out before swapping distributors and ignitors and getting code 21.

Now I drove the HE351 and it pulled like a freight train. It's 9:1 with a 60mm turbo and BCPR6ES plugs gapped to .035. And it didn't cut out at all, and I don't even know what my timing is set at. I eyeballed what looked like 15. LOL.

Was it the ignitor? Possibly has something to do with spark delivery. My car was blowing out spark last time, so its possible.

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

I'm going to go pick up some tomorrow to put on both my cars

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

BWD: http://shop.advanceautoparts.com/webapp … EAMS_____#

Beck/Arnley: http://shop.advanceautoparts.com/webapp … NEAMS_____

I need to trim the bracket down some, or make a new one.

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

Interchange:

INFINITI M30 (1990 - 1991)
NISSAN ALTIMA (1993 - 1997)
NISSAN AXXESS (1990 - 1992)
NISSAN D21 PICKUP (1990 - 1994)
NISSAN MAXIMA (1989 - 1994)
NISSAN NX (1991 - 1993)
NISSAN PATHFINDER (1987 - 1995)
NISSAN PICKUP (1995 - 1996)
NISSAN PULSAR NX (1989 - 1990)
NISSAN SENTRA (1989 - 1994)
NISSAN STANZA (1990 - 1992)

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

For the Sentra/NX, is it the GA16, the SR20, or both? For the D21, is the KA or VG, or both?

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

[quote]NissanEgg wrote: Not 100% sure, just copied it off rock auto....I'd say check those and confirm its PRW-2 before buying.

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

I advise not buying a 3rd party unit.
Buy OEM, because 3rd party manufacturers believe that a transistor is a transistor is a transistor is a transistor.

they may have "close enough" specs, but just get a PRW-2 at the JY and you'll have a genuine nissan part for less than a 3rd party unit.

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

I have highly considered sending you a camera so we don't have to suffer from blurry pics lol I do appreciate all you do though thanks!

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

[quote]MuhKaydenZ wrote: it's ok, mike did a poor job on that bracket anyway :nanan?re

I'll take pics when I put my bracket on tonight.

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

[quote]Careless wrote: [quote=MuhKaydenZ]Its a stock pathfinder bracket…lol

I have a better camera, but I don't carry it around all the time…so I use my cell phone most of the time, and it takes poopy pictures.

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

here is where I got my two… looks like there are 2 left

http://www.ebay.com/itm/89-95-NISSAN-MA … c5&vxp=mtr

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

Just did this upgrade swap on both my Z's the 84 n/a had some noticeable improvement but my 86 VG33 swapped turbo ran quite a bit better thank you for showing us this swap! Highly recommended cheap easy upgrade!

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

Looks like Bosch sell the PRW-2 stamped unit as well, their part number is BIM091.

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

did some searching, looks like the PRW-2 transistor is currently Nissan part # 22020-56E16

list of cars it's found on: http://www.nissanpartszone.com/Page_Pro … 2020-56E16

to answer a question, for the Sentra, it's for the GA16 only. for the D21, VG only.

the other PTU is part # 22020-53J20.

used to be 22020-56E11 for all of these models (what it states here and on lookup at any dealer's TradeMotion catalog): http://www.nissanpartszone.com/Page_Pro … 2020-56E11

22020-53J20 also fits 91-94 SR20 powered vehicles (Sentra/NX/G20).

Re: Upgrade to PRW-2 Ign. Control Module (Power Transistor U

everybody gets a PRW-2!